• Huawei B618s-22d Setup Download
• Huawei B618s-22d Setup Software

To use the Huawei B618 to access the Internet, you must create a network profile or set the default network profile and operator’s network.

• Creating a Network Profile
  If you are using theHuawei B618 Router for the first time, you must create a network profile to access the Internet.
• Setting the Default Network Profile
  After you set the default profile, theHuawei B618 Router accesses the Internet via the default operator’s network.
• Setting the Operator’s Network
  After configuring the settings, theHuawei B618 Router can quickly find networks.
• Accessing the Internet Using the Cellular Data Network
  Use the following method to connect theHuawei B618 Router to the Internet.
• Accessing the Internet Using an Ethernet Connection
  Configure Ethernet connection settings the first time theHuawei B618 Router connects to the Internet using an Ethernet connection.
• Connecting Clients to theHuawei B618 Router over a WLAN
  After WLAN is enabled on the Huawei B618 Router, clients can connect to the Huawei B618 Router and access the Internet using it.
• Viewing the Clients Connected
  Check the number of clients connected to theHuawei B618 Router and their details.
• Adding a Client to the Blacklist
  On theHuawei B618 Router‘s web management page, you can add unwanted clients connected to the Huawei B618 Router to the blacklist to better secure the Wi-Fi network.

——————————————————————————————————————–

Creating a Network Profile

Huawei B618s-22d Setup - fasrfrog The Huawei B618s-22d is an ultra-fast CAT11 WiFi router with download speeds up to 600 Mbps. It can be used as a fixed router (ethernet) or mobile router (4G +). Open the HUAWEI AI Life App from your phone and go to Tools Advanced settings Network Wi-Fi Extender. Select the Wi-Fi network to extend and enter the Wi-Fi password. Touch √ in the upper right corner of the screen to confirm. Set up the router. Place the HUAWEI WiFi Extender (new or factory reset) within 1 meter of the router and connect it to the power supply. Wait for approximately 1 minute until the router's indicator starts to flash, indicating that the router has detected the extender. Press the H (Hi) or WPS button on the router to start pairing. We thought it wouldn't be right if we didn't compare the Huawei B818 to its predecessor the Huawei B618.We went over the initial design, the different compon.

If you are using the Huawei B618 Router for the first time, you must create a network profile to access the Internet.

Procedure

1. Choose Settings> Dial-up > Profile Management .
2. Click New Profile.
3. Set the profile-associated parameters.

NOTE:

• The value of Profile namecan contain a maximum of 20 characters, including the following: 0-9, a-z, A-Z, blank space, and ! # $ ( ) * – . / = @ [ ] ^ _ { } ~ | , ; % + ?
• Contact your service provider for detailed parameter settings.

4. Click Save.

Setting the Default Network Profile

After you set the default profile, the Huawei B618 Router accesses the Internet via the default operator’s network.

Procedure

1. Choose Settings> Dial-up > Profile Management .
2. From the Profile namedrop-down list, select a network profile.
3. Click Apply.

Setting the Operator’s Network

After configuring the settings, the Huawei B618 Router can quickly find networks.

• Selecting the Operator’s Network Type
  Select your operator’s network type to find and log in to the network quickly.
• Searching for and Registering with a Network
  The Huawei B618 Routersupports both automatic and manual network registration.

Selecting the Operator’s Network Type

Select your operator’s network type to find and log in to the network quickly.

Context

For details about your network type, contact your operator.

Procedure

1. Choose Settings> Dial-up > Network Settings.
2. From Preferred mode, select a mode.
3. Click Apply.

Searching for and Registering with a Network

The Huawei B618 Router supports both automatic and manual network registration.

Procedure

1. Choose Settings> Dial-up > Network Settings.
2. From Mode, select a mode.
   • Auto: The Huawei B618 Routersearches for an available network and registers with the network automatically.
   • Manual: You need to search for an available network and register with it manually.
3. Register with a network.
   • In Automode, click Apply.
   • In Manualmode, select one of the networks found and click OK.

Accessing the Internet Using the Cellular Data Network

Use the following method to connect the Huawei B618 Router to the Internet.

Procedure

1. Choose Settings> Dial-up > Connect .
2. Click On.
3. Connect to the Internet.

NOTE:

• By default, Huawei B618 Routerconnect to the Internet automatically.
• You can enable or disable the data roaming function.

Accessing the Internet Using an Ethernet Connection

Configure Ethernet connection settings the first time the Huawei B618 Router connects to the Internet using an Ethernet connection.

Procedure

1. Using a network cable, connect the Huawei B618 Routerto a router’s WAN port or the Ethernet port on a wall.
2. Set Ethernet parameters according to Setting Up the Ethernet Connection Mode.

Setting Up the Ethernet Connection Mode

This section describes how to set up the Ethernet connection mode and parameters.

Procedure

1. Choose Settings> Ethernet > Ethernet Settings.
2. Set the Huawei B618 Router‘s connection parameters according to the following table.

3. Click Apply.

Connecting Clients to the Mobile Broadband over a WLAN

After WLAN is enabled on the Huawei B618 Router, clients can connect to the Huawei B618 Router and access the Internet using it.

Prerequisite

The Huawei B618 Router is connected to the Internet.

Procedure

1. Choose Settings> WLAN > WLAN Basic Settings .
2. View the default value of SSID.

NOTE:

• You can change SSIDto ensure the WLAN security. For details, see Changing the SSID. To further improve the WLAN security, you can set a security key for the WLAN. For details, see Setting the WLAN Key.
• To facilitate connections from clients, enable SSID broadcast. For details, see Enabling or Disabling the SSID Broadcast.

3. Enter SSIDon clients.

After connecting to the Huawei B618 Router, clients can access the Internet using the Huawei B618 Router.

Changing the SSID

This section describes how to change the service set identifier (SSID).

Procedure

1. Choose Settings> WLAN > WLAN Basic Settings .
2. From the SSID list, choose the SSID you want to change, and click Edit.
3. In SSID, enter the SSID.
4. Click Apply.

Setting the WLAN Key

To improve the security of the wireless local area network (WLAN), set a security key for the WLAN.

Procedure

1. Choose Settings> WLAN > WLAN Basic Settings .
2. From the SSID list, choose the SSID you want to change, and click Edit.
3. Select Security mode.
   • None(open): No encryption. No security key is required when clients access the WLAN.

NOTE:

For daily use, it is recommended that you set a security key, to improve the security performance of a WLAN.

• WEP: This stands for Wired Equivalent Privacy.
• WPA2-PSK: This is the second version of WPA-PSK and is more secure than WPA-PSK.
• WPA/WPA2-PSK: Both WPA-PSKand WPA2-PSK encryption modes are supported. Clients can access the WLAN in WPA-PSK or WPA2-PSK

4. Enter a security key.

NOTE:

Select Show password to view the security key that you have entered.

5. Click Apply.

Setting a WPA Security Key for the WLAN

1. From Security mode, select WPA2-PSK.
2. In WLAN key, enter the security key. For example, 12345678.
3. Click Apply.

Enabling or Disabling the SSID Broadcast

If the service set identifier (SSID) broadcast function is enabled, the Huawei B618 Router broadcasts the SSID of the wireless local area network (WLAN) facilitating clients’ access to the WLAN. The disadvantage is that unauthorized clients can also access the WLAN. If the SSID broadcast is disabled, the Huawei B618 Router does not broadcast the SSID of the WLAN. So the SSID must be entered manually and correctly from a client before the client accesses the WLAN. This improves the security of the WLAN.

Procedure

1. Choose Settings> WLAN > WLAN Basic Settings .
2. From the SSID list, choose the SSID you want to change, and click Edit.
3. Set SSID broadcast.
   • Enable: to enable the SSID broadcast.
   • Disable: to disable the SSID broadcast.
4. Click Apply.

NOTE:

During the process of setting up the WLAN, you can set the SSID broadcast to Enable to facilitate the access from clients. After the WLAN is set up, set the SSID broadcast to Disable to improve the security of the WLAN.

Viewing the Clients Connected

Check the number of clients connected to the Huawei B618 Router and their details.

Procedure

1. Choose Settings> Security > Device Management.
2. Under Connected WLAN clients, view the clients connected to the Huawei B618 Router.

Adding a Client to the Blacklist

On the Huawei B618 Router‘s web management page, you can add unwanted clients connected to the Huawei B618 Router to the blacklist to better secure the Wi-Fi network.

Procedure

1. Choose Settings> Security > Device Management.
2. Under Connected WLAN clients, check the information about clients connected to the Huawei B618.
3. Find the client you want to add to the blacklist, and click Block to display the Confirm dialog box.
4. Click OK.

NOTE:

• Under Blacklist, view all clients on the blacklist.
• To remove a client from the blacklist, click Delete under Blacklist.

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Many people are already getting or planning to get the Huawei B618 4G LTE Advanced Pro Router, but many users may want to know how to use or setup the Huawei B618 router. Today, we will guide you know the Huawei B618 and use the Huawei LTE router well.

Getting to know your LTE CPE B618

Note:

* During thunderstorms and rainy weather, turn off and disconnect the LTE CPE B618.

* The LTE B618 CPE function descriptions and illustrations in this article are for your reference only. The product you have purchased may vary.

Application scenario

The Huawei B618 Lte Cpe can:

* Provide Internet access for Wi-Fi® devices and a computer.

* Connect to a telephone for voice services.

* Expand LAN coverage together with a hub or a switch.

Note:

When the Huawei LTE CPE B618 is in use, you can alter its position or orientation to improve signal reception.

Selecting the installation environment Obstacles such as concrete and wooden walls will affect the transmission of the network signal. It is recommended that when you install LTE CPE you choose an open space. Keep the LTE CPE away from equipment that generates strong magnetic and electric fields, for instance microwaves, refrigerators, and satellite receivers.

Appearance

1. External antenna sockets (* Connect to external antennas).
2. Power button Press and hold to power the B618 on or off.
3. USB port Connect to a USB device.
4. WAN/LAN port

– Working as a LAN port when connected to a computer, switch, or other LAN device.

– Working as a WAN port when connected to an Ethernet port on the wall.

5. Landline phone port Connect to a telephone.
6. Power input Connect to compatible power adapter.
7. Signal indicators Green: signal reception available (more indicators mean better reception).
8. WPS button Press and hold to active WPS connection when Wi-Fi is turned on.
9. Indicators
10. Micro-SIM card slot Accommodate a micro-SIM card.
11. RESET button Restore the LTE CPE to its factory settings.

* Power LED indicator

Off: Power off.

On: Power on.

* Status LED indicator

Off: Data server connection is disconnected.

Blinking in green: Firmware update.

Green: Get IP address of WAN.

* LAN LED indicator

Off: No device is connected to a LAN port.

Blinking: data is being transmitted through a LAN port.

Green: At least one of the LAN ports is connected to a device.

* Wi-Fi LED indicator

Off: Both 2.4G and 5G Wi-Fi is closed.

Blinking in green: WPS open.

Green: Both or one of the 2.4G and 5G Wi-Fi is opened.

* Mode LED indicator

Steady cyan/blue/ yellow: connected to a mobile network.

Steady green: connected to an Ethernet network.

Steady red: The SIM card is not recognized, the PIN has not been entered, or the PIN verification failed.

Huawei B618 Setup

1. Installing the micro-SIM card Install the micro-SIM card according to the illustration.

– Note: When removing the micro-SIM card, gently press the micro-SIM card in, then release. The card will automatically pop out.

– Do not remove the micro-SIM card when the LTE CPE is powered on. Doing so will affect the performance of your LTE CPE, and data stored on the micro-SIM card may be lost.

– Note: When removing the micro-SIM card, gently press the micro-SIM card in, then release. The card will automatically pop out.

– Do not remove the micro-SIM card when the LTE CPE is powered on. Doing so will affect the performance of your LTE CPE, and data stored on the micro-SIM card may be lost.

2. Connecting to a power adapter

– Install the power adapter according to the illustration.

Note: Use the provided power adapter. Use of an incompatible power adapter or one from an unknown manufacturer may cause the LTE CPE to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.

Connecting to your LTE B618 router’s Wi-Fi network

Once the router has connected to a mobile data network, you can connect your computer or mobile phone to the router’s Wi-Fi network to access the Internet. Please refer to the label on the bottom of the router for the default wireless network name (SSID) and password (Wi-Fi KEY).

Note: 1.) When the Wi-Fi LED indicator is steady on, Wi-Fi is enabled. To enable or disable Wi-Fi, refer to the help section on the router’s web-based management page. 2.) Ensure that you promptly change the Wi-Fi network name and password on the web-based management page to prevent unauthorized access to your Wi-Fi network. Once you have changed the password, you will need to reconnect to the router’s Wi-Fi network.

Configuring your Huawei B618 router

You can configure the router using the web-based management page. Please refer to the label on the bottom of the router for the default IP address, user name, and password. More information can be found in the help section of the web-based management page.

Note: You will be prompted to change the default login password for the web-based management page to prevent unauthorized users from changing the router’s settings.

Optional configurations

Note: The features described in this section are for reference purposes only. Your router may not support all of these features.

1. Connecting multiple devices You can connect a computer, or landline phone to the router to access the Internet, make telephone calls, and more.
2. Installing external antennas You can install external antennas to improve signal reception. Please contact your network service provider to purchase the antennas.

Huawei B618s-22d Setup Download

Note: Turn off the router and unplug the power adapter before installing any external antennas. External antennas are only suitable for indoor use. Do not use external antennas during thunderstorms. Only use external antennas provided by your network service provider.

3. Accessing the Internet through an Ethernet port

You can connect the router to a wall-mounted Ethernet port using an Ethernet cable to connect to the Internet when you have used up your data allowance. Configure the relevant settings on the web-based management page before connecting to the Internet through an Ethernet port. More information can be found in the help section of the web-based management page.

4. Restoring to Factory Settings

If you forget some configuration parameters, you can restore the LTE CPE to its factory settings and then configure the LTE CPE again. Use a sharply pointed object to press and hold the RESET button until the Power indicator turns off. The LTE CPE is then restored to its factory settings.

Note: After you carry out this operation, the LTE CPE’s personal configuration parameters will all be deleted. All configurations on the web management page will be restored to the factory settings.

5. Establishing a WPS Connection

If the Wi-Fi device to be connected to the LTE CPE supports WPS, the wireless network encryption key is generated automatically and there is no need to enter it manually. The steps for WPS connection are as follows: 1.) Turn on the CPE. 2.) Turn on the Wi-Fi device to be connected to the LTE CPE. 3.) Activate the LTE CPE’s WPS. 4.) Activate the Wi-Fi device’s WPS.

Note: Press and hold the WPS button for two to five seconds to set up a 2.4 GHz WPS connection, or press and hold the button for more than five seconds to set up a 5 GHz WPS connection. For specific instructions for the Wi-Fi device, refer to the device’s user manual.

6. Downloading Huawei HiLink App

Scan the QR code to download the Huawei HiLink App and configure the router from your phone.

The post Huawei B618 LTE Router User Manual appeared first on 4G LTE Mall.

Huawei B618s-22d Setup Software